Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 82

Related Commands Version 8.3.11.1 8.1.1.0 7.6.1.0 7.5.1.0 E-Series Description Introduced on the Z9000. Introduced on the E-Series ExaScale. Introduced on the S-Series. Introduced on the C-Series and E-Series. Original command. exit - returns to the lower command mode. exec-timeout Set a time interval that the system waits for input on a line before disconnecting the session. C9000 Series Syntax exec-timeout minutes [seconds] To return to default settings, use the no exec-timeout command. Parameters minutes seconds Enter the number of minutes of inactivity on the system before disconnecting the current session. The range is from 0 to 35791. The default is 10 minutes for the console line and 30 minutes for the VTY line. (OPTIONAL) Enter the number of seconds. The range is from 0 to 2147483. The default is 0 seconds. Defaults 10 minutes for console line; 30 minutes for VTY lines; 0 seconds Command Modes LINE Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.12.0 8.3.11.1 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the S4810. Introduced on the Z9000. 82 Control and Monitoring