Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 437

peer-group-name Enter the name of the peer group to set the default route of all routers in that peer group. route-map map- (OPTIONAL) Enter the keyword route-map then the name name of a configured route map. Defaults Not configured. Command Modes ROUTER BGP Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.8.1.0 7.7.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Usage Information If you apply a route map to a BGP peer or neighbor with the neighbor defaultoriginate command configured, the software does not apply the set filters in the route map to that BGP peer or neighbor. neighbor description Assign a character string describing the neighbor or group of neighbors (peer group). C9000 Series Syntax neighbor {ip-address | peer-group-name} description text To delete a description, use the no neighbor {ip-address | peer-groupname} description command. Parameters ip-address Enter the IP address of the neighbor in dotted decimal format. peer-group-name Enter the name of the peer group. text Enter a continuous text string up to 80 characters. Defaults Not configured. Command Modes ROUTER BGP Border Gateway Protocol 437