Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1696

Version 8.3.19.0 8.3.11.1 8.3.7.0 7.7.1.0 7.6.1.0 7.5.1.0 6.2.1.1 Description Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Added the keyword multicast. Added the DSCP Marking option support on the S-Series. Introduced on the S-Series. Introduced on the C-Series. Added support for the DSCP Marking option. Introduced on the E-Series. Usage Information To access this command, enter the class-map command. After the class map is identified, you can configure the match criteria. The match ip dscp and match ip precedence commands are mutually exclusive. Up to 64 IP DSCP values can be matched in one match statement. For example, to indicate IP DCSP values 0 1 2 3 4 5 6 7, enter either the match ip dscp 0,1,2,3,4,5,6,7 or match ip dscp 0-7 command. NOTE: Only one of the IP DSCP values must be a successful match criterion, not all of the specified IP DSCP values must match. Related Commands class-map - identifies the class map. match ip precedence Use IP precedence values as a match criteria. C9000 Series Syntax match {ip | ipv6 | ip-any} precedence ip-precedence-list [setip-dscp value | set-color value ] To remove IP precedence as a match criteria, use the no match {ip | ipv6 | ip-any} precedence ip-precedence-list [[multicast] set-ip-dscp value| set-color value command. Parameters ip ipv6 ip-any ip-precedencelist Enter the keyword ip to support IPv4 traffic. Enter the keyword ipv6 to support IPv6 traffic. Enter the keyword ip-any to support IPv4 and IPv6 traffic. Enter the IP precedence value(s) as the match criteria. Separate values by commas - no spaces ( 1,2,3 ) or indicate 1696 Quality of Service (QoS)