Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1652

Parameters pe pe-id stack-unit unit number Enter the keyword pe and port extender ID. Range is from 0 to 255. Enter the keyword stack-unit and the unit number. Range is from 0 to 7. Defaults None Command Modes EXEC Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) Description Introduced on the C9010. Usage Information The upgrade poe-controller pe command is used to manually upgrade the PoE controller firmware for a specified port extender unit. You can upgrade the PoE controller firmware using the firmware image that is packed with the Dell Networking OS. Once the upgrade is successful, the Port Extender reloads automatically. Example Dell#upgrade poe-controller pe 254 stack-unit 1 show power inline Display the PoE power allocation on a specified port extender. C9000 Series Syntax Parameters show power inline {pe pe-id stack-unit unit number | interface interface } pe pe-id Enter the keyword pe and the port extender ID. Range is from 0 to 255. stack-unit unit number Enter the keyword stack-unit and the stack unit number Range is from 0 to 7. interface interface Enter the interface keyword, and specify one of the following interface types: • For a PE Gigabit Ethernet interface, enter the keyword peGigE. You must specify a pe-id/Unit/Port for the interface. 1652 Port Extenders (PE)