Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1614

slot/port-range Enter the slot/port-range to specify a linecard and either a single port number, a port range, or a combination of both for auto-LAG configuration. Slot number range is from 0 to 9. In linecard slots 0 to 9, the range of port numbers is from 0 to 23. Default None Command Modes PE CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command-Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) Description Introduced on the C9010. Usage Information This command provisions the port extender for automatic link aggregation group (LAG) port channel creation on the connected ports. The LAG member ports must be operationally up and have a default port configuration with no Layer 2 and Layer 3 configuration. The port interfaces must be of the same type. You can configure up to 16 switch ports in the auto-LAG. • The slot/port-range specifies a line card and either a single port number, a port range, or a combination of both for auto-LAG configuration. The range of slot numbers is from 0 to 9 for linecard slots. The range of port numbers is from 0 to 23. Example Dell(conf)# feature extended-bridge Dell(conf)# pe provision 2 Dell(conf-pe-4)#cascade interface tengigabitethernet 1/1-2 clear pe statistics Delete the statistics related to a specified port extender. C9000 Series Syntax Parameters clear pe pe-id statistics pe-id Enter the keyword pe and the port extender ID. Range is from 0 to 255. 1614 Port Extenders (PE)