Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 387

summary-only suppress-map map-name (OPTIONAL) Enter the keyword summary-only to advertise only the aggregate address. Specific routes are not advertised. (OPTIONAL) Enter the keywords suppress-map then the name of a configured route map to identify which morespecific routes in the aggregate are suppressed. Defaults Not configured. Command Modes • ROUTER BGP ADDRESS FAMILY • ROUTER BGP ADDRESS FAMILY IPv6 Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.8(0.0) 9.7(0.0) 9.0.2.0 8.3.19.0 8.3.11.1 8.3.7.0 7.8.1.0 7.7.1.0 Description Introduced on the C9010. Introduced on the S3048-ON and S4048-ON. Introduced on the S6000-ON. Introduced on the S6000. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Usage Information At least one of the routes included in the aggregate address must be in the BGP routing table for the configured aggregate to become active. If routes within the aggregate are constantly changing, do not add the as-set parameter to the aggregate as the aggregate flaps to keep track of the changes in the AS_PATH. In route maps used in the suppress-map parameter, routes meeting the deny clause are not suppress; in other words, they are allowed. The opposite is also true: routes meeting the permit clause are suppressed. If the route is injected via the network command, that route still appears in the routing table if the summary-only parameter is configured in the aggregateaddress command. Border Gateway Protocol 387