Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1395

auto-cost Specify how the OSPF interface cost is calculated based on the reference bandwidth method. C9000 Series Syntax auto-cost [reference-bandwidth ref-bw] To return to the default bandwidth or to assign cost based on the interface type, use the no auto-cost [reference-bandwidth] command. Parameters ref-bw (OPTIONAL) Specify a reference bandwidth in megabits per second. The range is from 1 to 4294967. The default is 100 megabits per second. Defaults 100 megabits per second. Command Modes ROUTER OSPFv3 Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) Description Introduced on the C9010. clear ip ospf Clear all OSPF routing tables. C9000 Series Syntax Parameters clear ip ospf process-id [vrf {vrf name}]|[process] process-id vrf name process Enter the OSPF Process ID to clear a specific process. If no Process ID is entered, all OSPF processes are cleared. Enter the VRF process identifier to tie the OSPF instance to the VRF. All network commands under this OSPF instance are then tied to the VRF instance. (OPTIONAL) Enter the keyword process to reset the OSPF process. Command Modes EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. Open Shortest Path First (OSPFv2 and OSPFv3) 1395