Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 152

summary ifagt number ifcb interface (OPTIONAL) Enter the keyword summary to display brief information about IFM clients. Enter the keyword ifagt then the number of an interface agent to display software pipe and IPC statistics. Enter the keyword ifcb then one of the following interface IDs then the slot/port information to display interface control block information for that interface: • For a Port Channel interface, enter the keyword portchannel then a number: The range is from 1 to 128. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE. linecard slot-id trace-flags Enter the linecard slot-id parameters to specify the switch ports on a line card. The range of slot IDs is from 0 to 11. Enter the keyword trace-flags to display IFM information for internal trace flags. Defaults Command Modes none • EXEC • EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9 (0.0) 9.2(1.0) 8.3.19.0 8.3.12.0 8.3.11.1 8.5.1.0 7.6.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the S4810. Introduced on the Z9000. Added support for 4-port 40G line cards on ExaScale. Introduced for the C-Series and S-Series. Example Dell# show software ifm clients summary ClntType Inst svcMask subSvcMask tlvSvcMask tlvSubSvc swp IPM 0 0x00000000 0x00000000 0x90ff71f3 0x021e0e81 31 RTM 0 0x00000000 0x00000000 0x800010ff 0x01930000 43 VRRP 0 0x00000000 0x00000000 0x803330f3 0x00400000 39 152 Control and Monitoring