Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 480

Dell#show ip bgp community no-advertise BGP local RIB : Routes to be Added 0, Replaced 0, Withdrawn 0 BGP local router ID is 192.168.11.5 Status codes: s suppressed, S stale, d dampened, h history, * valid, > best Path source: I - internal, a - aggregate, c - confed-external, r - redistributed n - network, D - denied, S - stale Origin codes: i - IGP, e - EGP, ? - incomplete Network Weight Path *> 66.0.0.0/24 172.16.0.2 Next Hop Metric LocPrf 0 200 i show ip bgp community-list View routes that a specific community list affects. C9000 Series Syntax Parameters show ip bgp [vrf vrf-name] [ipv4 {unicast | multicast} | ipv6 unicast] community-list community-list-name [exact-match] vrf vrf-name ipv4 unicast ipv4 multicast ipv6 unicast community-listname exact-match (OPTIONAL) Enter the keywords vrf and then the name of the VRF to view routes affected by a specific community list corresponding to that VRF. (OPTIONAL) Enter the keywords ipv4 unicast to view information only related to ipv4 unicast routes. (OPTIONAL) Enter the keyword ipv4 followed by the keyword multicast to view information related only to ipv4 multicast routes. (OPTIONAL) Enter the keyword ipv6 followed by the keyword unicast to view information related only to ipv6 unicast routes. Enter the name of a configured IP community list (maximum 140 characters). Enter the keyword for an exact match of the communities. Command Modes • EXEC • EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. 480 Border Gateway Protocol