Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 2116

You may specify both bytes of the 2-byte S-Tag TPID. The range is from 0 to FFFF. The default is 9100. Defaults 0x9100 Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.7.0 8.2.1.0 8.2.1.0 7.6.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the S4810. Introduced on the E-Series ExaScale. C-Series and S-Series accept both bytes of the 2-byte S-Tag TPID. Introduced on the E-Series ExaScale. Introduced on the C-Series and S-Series. Usage Information For specific interoperability limitations regarding the S-Tag TPID, see the Dell Networking OS Configuration Guide. The four characters you enter in the CLI for number are interpreted, as shown in the following table. Number 1 10 81 8100 Resulting TPID 0x0001 0x0010 0x0081 0x8100 Related Commands • portmode hybrid - sets a port (physical ports only) to accept both tagged and untagged frames. A port configured this way is identified as a hybrid port in report displays. • vlan-stack trunk - specifies a Layer 2 port or port channel as a trunk port to the Stackable VLAN network. 2116 VLAN Stacking