Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1947

logging on Specify that debug or error messages are asynchronously logged to multiple destinations, such as the logging buffer, Syslog server, or terminal lines. C9000 Series Syntax logging on To disable logging to logging buffer, Syslog server and terminal lines, use the no logging on command. Defaults Enabled. Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.6.1.0 7.5.1.0 Description Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Usage Information When you use the no logging on command, messages are logged only to the console. Related Commands logging - enables logging to the Syslog server. logging buffered - sets the logging buffered parameters. logging console - sets the logging console parameters. logging monitor - sets the logging parameters for the terminal connections. logging source-interface Specify that the IP address of an interface is the source IP address of Syslog packets sent to the Syslog server. C9000 Series Syntax logging source-interface interface Simple Network Management Protocol (SNMP) and Syslog 1947