Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1480

debug ipv6 ospf packet Display debug information and interface types on OSPF IPv6 packets. C9000 Series Syntax Parameters debug ipv6 ospf {packet | events} [interface] interface (OPTIONAL) Enter one of the following keywords and slot/ port or number information: • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/port information. • For a Port Channel interface, enter the keyword portchannel then a number. The range is 1 to 128. • For a tunnel interface, enter the keyword tunnel then a number. The range is 1 to 16383. • For a VLAN, enter the keyword vlan then a number from 1 to 4094. Command Modes EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 9.1.(0.0) 8.3.19.0 7.8.1.0 7.4.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4810 and Z9000. Introduced on the S4820T. Added support for C-Series. Introduced on E-Series. Example Dell#debug ipv6 ospf packet OSPFv3 packet related debugging is on for all interfaces 05:21:01 : OSPFv3: Sending, Ver:3, Type:1(Hello), Len:40, Router ID:223.255.255.254, Area ID:0, Inst:0, on Po 255 05:21:03 : OSPFv3: Received, Ver:3, Type:1(Hello), Len:40, Router ID:223.255.255.255, Area ID:0, Chksum:a177, Inst:0, from Vl 100 05:20:25 : OSPFv3: Sending, Ver:3, Type:4(LS Update), Len:580, Router ID:223.255.255.254, Area ID:0, Inst:0, on Vl 1000 1480 Open Shortest Path First (OSPFv2 and OSPFv3)