Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1909

show snmp Display the status of SNMP network elements. C9000 Series Syntax Command Modes show snmp • EXEC • EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.6.1.0 7.5.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Example Related Commands Dell#show snmp 32685 SNMP packets input 0 Bad SNMP version errors 0 Unknown community name 0 Illegal operation for community name supplied 0 Encoding errors 96988 Number of requested variables 0 Number of altered variables 31681 Get-request PDUs 968 Get-next PDUs 0 Set-request PDUs 61727 SNMP packets output 0 Too big errors (Maximum packet size 1500) 9 No such name errors 0 Bad values errors 0 General errors 32649 Response PDUs 29078 Trap PDUs Dell# snmp-server community - enables the SNMP and set community string. Simple Network Management Protocol (SNMP) and Syslog 1909