Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1429

To disable redistribution, use the no redistribute isis [tag] [level-1 | level-1-2 | level-2] [metric metric-value | metric-type typevalue] [route-map map-name] [tag tag-value] command. Parameters tag (OPTIONAL) Enter the name of the IS-IS routing process. level-1 level-1-2 (OPTIONAL) Enter the keywords level-1 to redistribute only IS-IS Level-1 routes. (OPTIONAL) Enter the keywords level-1-2 to redistribute both IS-IS Level-1 and Level-2 routes. level-2 metric metricvalue (OPTIONAL) Enter the keywords level-2 to redistribute only IS-IS Level-2 routes. (OPTIONAL) Enter the keyword metric then a number. The range is from 0 (zero) to 4294967295. metric-type type- (OPTIONAL) Enter the keywords metric-type then one of value the following: • 1 = for OSPF External type 1 • 2 = for OSPF External type 2 route-map mapname tag tag-value (OPTIONAL) Enter the keywords route-map then the name of the route map. (OPTIONAL) Enter the keyword tag to set the tag for routes redistributed into OSPF. The range is from 0 to 4294967295. Defaults Not configured. Command Modes ROUTER OSPF Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.8.1.0 7.5.1.0 6.1.1.1 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Added support for Multi-Process OSPF. Introduced on the C-Series. Introduced on the E-Series. Open Shortest Path First (OSPFv2 and OSPFv3) 1429