Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 76

Usage Information This command enables (and disables) the collection of CPU traffic statistics from the time this command is executed (not from system boot). However, excessive traffic a CPU receives automatically triggers (turn on) the collection of CPU traffic statics. The following message is an indication that collection of CPU traffic is automatically turned on. To view the traffic statistics, use the show cputraffic-stats command. If the CPU receives excessive traffic, traffic is rate controlled. NOTE: This command must be enabled before the show cpu-trafficstats command displays traffic statistics. Dell Networking recommends disabling debugging (no debug cpu-traffic-stats) after troubleshooting is complete. Related Commands show cpu-traffic-stats - displays the cpu traffic statistics. debug ftpserver View transactions during an FTP session when a user is logged into the FTP server. C9000 Series Syntax debug ftpserver Command Modes EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.12.0 8.3.11.1 8.1.1.0 7.6.1.0 7.5.1.0 E-Series Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the S4810. Introduced on the Z9000. Introduced on the E-Series ExaScale. Introduced on the S-Series. Introduced on the C-Series. Original command. 76 Control and Monitoring