Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 989

default-information originate Generates a default route into an IS-IS routing domain and controls the distribution of default information. C9000 Series Syntax default-information originate [always] [metric metric] [routemap map-name] To disable the generation of a default route into the specified IS-IS routing domain, use the no default-information originate [always] [metric metric] [route-map map-name] command. Parameters always metric metric route-map mapname (OPTIONAL) Enter the keyword always to have the default route always advertised. (OPTIONAL) Enter the keyword metric then a number to assign to the route. The range is from 0 to 16777215. (OPTIONAL) A default route the routing process generates if the route map is satisfied. Defaults Command Modes Not configured. • ROUTER ISIS (for IPv4) • CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6) Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.5(0.1) 9.0.2.0 8.3.19.0 8.3.12.0 8.3.11.1 7.5.1.0 6.3.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S6000. Introduced on the S4820T. Introduced on the S4810. Introduced on the Z9000. Added IPv6 ISIS support. Introduced. Usage Information When you use this command to redistribute routes into a routing domain, the router becomes an autonomous system (AS) boundary router. An AS boundary Intermediate System to Intermediate System (IS-IS) 989