Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 88

Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.12.0 8.3.12.0 8.3.11.1 8.1.1.0 7.6.1.0 7.5.1.0 E-Series Description Introduced on the C9010 and C1048P. Introduced on the Z9500. Introduced on the S4820T. Changed the default from Force10 to FTOS. Introduced on the S4810. Introduced on the Z9000. Introduced on the E-Series ExaScale. Introduced on the S-Series. Introduced on the C-Series. Original command. Usage Information The host name is used in the command-line prompt. To configure a desired PE console hostname, use the hostname command from a PE console. To unconfigure the hostname configured for the PE console, use no hostname. If no hostnames are configured, the system. uses the default hostname, "Dell". Example (PE Console) Dell#hostname PE1 PE1# ip ftp password Specify a password for outgoing FTP connections. C9000 Series Syntax ip ftp password [encryption-type] password To remove a password and return to the default setting, use the no ip ftp password [password] command. Parameters encryption-type (OPTIONAL) Enter one of the following numbers: 88 Control and Monitoring