Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1911

• EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.6.1.0 7.5.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Usage Information The following Example displays a group named ngroup. The ngroup has a security model of version 3 (v3) with authentication (auth), the read and notify name is nview with no write view name specified, and finally the row status is active. Example Dell#show snmp group groupname: ngroup readview : nview notifyview: nview row status: active security model: v3 auth writeview: no write view specified Dell# Related Commands snmp-server group - configures an SNMP server group. show snmp user Display the information configured on each SNMP user name. C9000 Series Syntax Command Modes show snmp user • EXEC • EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Simple Network Management Protocol (SNMP) and Syslog 1911