Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 128

pe pe-id stack-unit unitnumber Enter the keyword pe then the port extender (PE) ID to display memory usage on the PE. The PE ID range is from 0 to 255. NOTE: The pe option is only available when the extended bridge feature is enabled. Enter the keyword stack-unit then the stack unit number. Range is from 0 to 7. Command Modes • EXEC • EXEC Privilege Defaults Display memory usage on all switch CPUs (Control Processor, Route Processor, and line cards). Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.5.1.0 E-Series Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the C-Series. Original command. Usage Information The output for show memory displays the memory usage of the line-card processor (LP) part (sysdlp) of the system. The sysdlp is an aggregate task that handles all the tasks running on the LP. The total counter size in show memory and show processes memory differs based on which OS processes are counted. • In the show memory output, the memory size is equal to the size of the application processes. • In the show processes memory output, the memory size is equal to the size of the application processes plus the size of the system processes. Examples Dell#show memory Statistics On CP Processor Total(b) Used(b) Free(b) Largest(b) Lowest(b) 128 Control and Monitoring