Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 2016

Version 7.6.1.0 7.5.1.0 6.1.1.0 Description Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Usage Information The following describes the show ntp associations command shown in the Example below. Field (none) Description One or more of the following symbols could be displayed: • * means synchronized to this peer. • # means almost synchronized to this peer. • + means the peer was selected for possible synchronization. • - means the peer is a candidate for selection. • ~ means the peer is statically configured. remote ref clock st when poll reach delay offset disp Displays the remote IP address of the NTP peer. Displays the IP address of the remote peer's reference clock. Displays the peer's stratum, that is, the number of hops away from the external time source. A 16 in this column means the NTP peer cannot reach the time source. Displays the last time the switch received an NTP packet. Displays the polling interval (in seconds). Displays the reachability to the peer (in octal bitstream). Displays the time interval or delay for a packet to complete a round-trip to the NTP time source (in milliseconds). Displays the relative time of the NTP peer's clock to the switch clock (in milliseconds). Displays the dispersion. Example Related Commands Dell#show ntp associations remote ref clock st when poll reach delay offset disp 10.10.120.5 0.0.0.0 16 - 256 0 0.00 0.000 16000.0 *172.16.1.33 127.127.1.0 11 6 16 377 -0.08 -1499.9 104.16 172.31.1.33 0.0.0.0 16 - 256 0 0.00 0.000 16000.0 192.200.0.2 0.0.0.0 16 - 256 0 0.00 0.000 16000.0 * master (synced), # master (unsynced), + selected, - candidate Dell# show ntp status - displays the current NTP status. 2016 System Time and Date