Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1705

Version 8.3.11.1 8.3.7.0 8.2.1.0 7.6.1.0 7.5.1.0 6.1.1.1 Description Introduced on the Z9000. Introduced on the S4810. Policy name character limit increased from 16 to 32. Introduced on the C-Series and S-Series. Introduced on the C-Series. Introduced on the E-Series. Usage Information To specify the name of the input QoS policy, use this command. After the input policy is specified, rate-police is defined. This command enables Qos-Policy-Input Configuration mode - (conf-qos-policy-in). When changing a Service-Queue configuration in a QoS policy map, all QoS rules are deleted and re-added automatically to ensure that the order of the rules is maintained. As a result, the Matched Packets value shown in the show qos statistics command is reset. If you create create a QoS input policy to be used for CoPP, you must enter the keyword cpu-qos. Related Commands rate police - incoming traffic policing function. qos-policy-output Create a QoS output policy. C9000 Series Syntax qos-policy-output qos-policy-name To remove an existing output QoS policy, use the no qos-policy-output qospolicy-name command. Parameters qos-policy-name Enter your output QoS policy name in character format (32 characters maximum). Defaults none Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Quality of Service (QoS) 1705