Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1662

show running-config monitor session Display the running configuration of all monitor sessions or a specific session. C9000 Series Syntax show running-config monitor session {session-ID} To display the running configuration for all monitor sessions, use the show running-config monitor session command. Parameters session-ID (OPTIONAL) Enter a session identification number. The range from 0 to 65535. Defaults Command Modes none • EXEC • EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.5(0.1) 9.0.2.0 8.3.19.0 8.3.11.1 8.3.11.1 8.1.1.0 7.7.1.0 7.5.1.0 7.4.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S6000. Introduced on the S4820T. Introduced on the S4810. Introduced on the Z9000. Introduced on the E-Series ExaScale. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Usage Information The monitoring command is saved in the running configuration at the Monitor Session mode level and can be restored after a chassis reload. Example Dell(conf-mon-sess-0)#do show running-config monitor session ! monitor session 0 source Port-channel 10 destination TenGigabitEthernet 0/33 direction tx ! 1662 Port Monitoring