Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 2017

show ntp status Display the current NTP status. C9000 Series Syntax Command Modes show ntp status • EXEC • EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.6.1.0 7.5.1.0 6.1.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Usage Information The following describes the show ntp status command shown in the Example below. Field Description "Clock is..." States whether or not the switch clock is synchronized, which NTP stratum the system is assigned and the IP address of the NTP peer. "frequency is..." Displays the frequency (in ppm), stability (in ppm) and precision (in Hertz) of the clock in this system. "reference time is..." Displays the reference time stamp. "clock offset is..." Displays the system offset to the synchronized peer and the time delay on the path to the NTP root clock. "root dispersion is..." Displays the root and path dispersion. System Time and Date 2017