Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1487

Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 9.1.(0.0) 8.3.19.0 7.4.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4810 and Z9000. Introduced on the S4820T. Introduced on the E-Series and C-Series. ipv6 ospf authentication Configure an IPsec authentication policy for OSPFv3 packets on an IPv6 interface. C9000 Series Syntax Parameters ipv6 ospf authentication {null | ipsec spi number {MD5 | SHA1} [key-encryption-type] key}} null ipsec spi number MD5 | SHA1 Causes an authentication policy configured for the area to not be inherited on the interface. Security Policy index (SPI) value that identifies an IPsec security policy. The range is from 256 to 4294967295. Authentication type: Message Digest 5 (MD5) or Secure Hash Algorithm 1 (SHA-1). key-encryptiontype (OPTIONAL) Specifies if the key is encrypted. Valid values: 0 (key is not encrypted) or 7 (key is encrypted). key Text string used in authentication. For MD5 authentication, the key must be 32 hex digits (nonencrypted) or 64 hex digits (encrypted). For SHA-1 authentication, the key must be 40 hex digits (non-encrypted) or 80 hex digits (encrypted). Defaults Not configured. Command Modes INTERFACE Open Shortest Path First (OSPFv2 and OSPFv3) 1487