Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1769

default-information originate Generate a default route for the RIP traffic. C9000 Series Syntax default-information originate [always] [metric metric-value] [route-map map-name] To return to the default values, use the no default-information originate command. Parameters always metric metricvalue route-map mapname (OPTIONAL) Enter the keyword always to enable the switch software to always advertise the default route. (OPTIONAL) Enter the keyword metric then a number as the metric value. The range is from 1 to 16. The default is 1. (OPTIONAL) Enter the keywords route-map then the name of a configured route-map. Defaults Disabled. Metric: 1. Command Modes ROUTER RIP Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.8.1.0 7.6.1.0 6.2.1.1 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Usage Information The default route must be present in the switch routing table for the defaultinformation originate command to take effect. Routing Information Protocol (RIP) 1769