Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 346

Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 8.1.1.0 7.6.1.0 7.5.1.0 6.1.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the E-Series ExaScale. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Related Commands match interface - redistributes routes that match the next-hop interface. match ip address - redistributes routes that match an IP address. match ip next-hop - redistributes routes that match the next-hop IP address. match ip route-source - redistributes routes that match routes advertised by other routers. match route-type - redistributes routes that match a route type. match tag - redistributes routes that match a specific tag. match origin To match routes based on the value found in the BGP path ORIGIN attribute, configure a filter. C9000 Series Syntax match origin {egp | igp | incomplete} To disable matching filter, use the no match origin {igp | egp | incomplete} command. Parameters egp igp Enter the keyword egp to match routes originating outside the AS. Enter the keyword igp to match routes originating within the same AS. 346 Access Control Lists (ACL)