Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1315

To clear the MSDP rejected source-active entries, use the no ip msdp cacherejected-sa {number} command then the ip msdp cache-rejected-sa {number} command. Parameters number Enter the number of rejected SA entries to cache. The range is from 0 to 32766. Defaults none Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.5(0.1) 8.3.19.0 8.3.11.1 8.3.7.0 7.4.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced Related Commands show ip msdp sa-cache rejected-sa ip msdp default-peer Define a default peer from which to accept all source-active (SA) messages. C9000 Series Syntax ip msdp default-peer peer address [list name] To remove the default peer, use the no ip msdp default-peer {peer address} list name command. Parameters peer address list name Enter the peer address in a dotted decimal format (A.B.C.D.) Enter the keywords list name and specify a standard access list that contains the RP address that should be Multicast Source Discovery Protocol (MSDP) 1315