Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 852

Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 8.3.19.0 8.3.12.0 8.1.1.0 7.5.1.0 7.6.1.0 Description Introduced on the C9010. Introduced on the S4820T. Introduced on the S4810. Introduced on the E-Series ExaScale. Introduced on the C-Series. Introduced on the E-Series Usage Information If you disable auto failover, enter the redundancy auto-failover-limit (without any parameters) to set auto failover to the default parameters (Count 3, Period 60 minutes). To view the redundancy status, use the show redundancy command. When you change one or both of the optional parameters, Dell Networking OS checks that the interval between auto failovers is more than five (5) minutes. If the interval is less, Dell Networking OS returns a configuration error message. redundancy disable-auto-reboot Prevent the system from auto-rebooting the failed module. C9000 Series Syntax Parameters redundancy disable-auto-reboot {linecard [slot-id | all] | pe pe-id stack unit unit-number | all | rpm} lincard slot-id / all Enter the keyword linecard with the slot-id to specify a linecard, or all to select all linecards. Linecard ID. Range is from 0 to 11. pe pe-id / all Enter the keyword pe and the port extender ID or type the option all to select all port extenders. Range is from 0 to 255. stack unit unitnumber Enter the keyword stack-unit and the configuration is applied to all the stack-units present in the PE. 852 High Availability (HA)