Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1260

30 Link Aggregation Control Protocol (LACP) This chapter contains commands for Dell Networks's implementation of the link aggregation control protocol (LACP) for creating dynamic link aggregation groups (LAGs) - known as "port-channels" in the Dell Networking operating software. NOTE: For static LAG commands, refer to Port Channel Commands in the Interfaces chapter), based on the standards specified in the IEEE 802.3 Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications. clear lacp counters Clear port channel counters. C9000 Series Syntax Parameters clear lacp port-channel-number counters port-channelnumber Enter a port-channel number. The range is from 1 to 128. Defaults Without a Port Channel specified, the command clears all Port Channel counters. Command Modes • EXEC • EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. 1260 Link Aggregation Control Protocol (LACP)