Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 534

Version 7.4.1.0 Description Introduced Usage Information The software compares the MEDs only if the path contains no external autonomous system numbers. If you enable this command, use the clear ip bgp * command to recompute the best path. bgp bestpath med missing-as-best During path selection, indicate preference to paths with missing MED (MULTI_EXIT_DISC) over those paths with an advertised MED attribute. C9000 Series Syntax bgp bestpath med missing-as-best To return to the default selection, use the no bgp bestpath med missing-asbest command. Defaults Disabled Command Modes ROUTER BGP Command History Version 9.9(0.0) 9.2(1.0) 8.2.1.0 7.4.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the E-Series ExaScale. Introduced Usage Information The MED is a 4-byte unsigned integer value and the default behavior is to assume a missing MED as 4294967295. This command causes a missing MED to be treated as 0. During the path selection, paths with a lower MED are preferred over those with a higher MED. bgp client-to-client reflection Allows you to enable route reflection between clients in a cluster. C9000 Series Syntax bgp client-to-client reflection To disable client-to-client reflection, use the no bgp client-to-client reflection command. Defaults Enabled when a route reflector is configured. 534 Border Gateway Protocol