Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 828

To disable debugging, use the no debug frrp {event | packet | detail} {ring-id} [countnumber] command. Parameters event packet detail ring-id count number Enter the keyword event to display debug information related to ring protocol transitions. Enter the keyword packet to display brief debug information related to control packets. Enter the keyword detail to display detailed debug information related to the entire ring protocol packets. (Optional) Enter the ring identification number. The range is from 1 to 255. Enter the keyword count then the number of debug outputs. The range is from 1 to 65534. Defaults Disabled. Command Modes CONFIGURATION (conf-frrp) Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.11.1 8.3.19.0 8.3.11.1 8.3.7.0 8.2.1.0 7.4.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the Z9000. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the C-Series. Introduced. Usage Information Because the resilient ring protocol can potentially transmit 20 packets per interface, restrict debug information. 828 Force10 OS Resilient Ring Protocol (FRRP)