Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 588

Related Commands • capture bgp-pdu neighbor - enables capture of an IPv6 BGP neighbor packet. • clear ip bgp - specifies a size for the capture buffer. show config View the current ROUTER BGP configuration. C9000 Series Syntax show config Command Modes ROUTER BGPV6-ADDRESS FAMILY Command History Version Description 9.9(0.0) Introduced on the C9010. 9.2(1.0) Introduced on the Z9500. Example Dell(conf-router_bgp)#show conf ! router bgp 18508 neighbor RR-CLIENT peer-group neighbor RR-CLIENT remote-as 18508 neighbor RR-CLIENT no shutdown neighbor RR-CLIENT-PASSIV peer-group passive neighbor RR-CLIENT-PASSIV remote-as 18508 neighbor RR-CLIENT-PASSIV subnet 9000::9:0/120 neighbor RR-CLIENT-PASSIV no shutdown neighbor 1109::33 remote-as 18508 neighbor 1109::33 update-source Loopback 101 neighbor 1109::33 no shutdown neighbor 2222::220 remote-as 18508 neighbor 2222::220 route-reflector-client neighbor 2222::220 update-source Loopback 100 neighbor 2222::220 no shutdown neighbor 4000::33 remote-as 18508 neighbor 4000::33 no shutdown neighbor 4000::60 remote-as 18508 neighbor 4000::60 no shutdown neighbor 9000::1:2 remote-as 640 no neighbor 9000::1:2 activate neighbor 9000::1:2 no shutdown ! Dell# show ip bgp next-hop View all next hops (via learned routes only) with current reachability and flap status. This command only displays one path, even if the next hop is reachable by multiple paths. C9000 Series Syntax show ip bgp next-hop [local-routes] 588 Border Gateway Protocol