Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1712

service-policy output Apply an output policy map to the selected interface. C9000 Series Syntax service-policy output policy-map-name To remove the output policy map from the interface, use the no servicepolicy output policy-map-name command. Parameters policy-map-name Enter the name for the policy map in character format (32 characters maximum). You can identify an existing policy map or name one that does not yet exist. Defaults none Command Modes INTERFACE Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.6.1.0 6.1.1.1 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the C-Series and S-Series. Introduced on the E-Series. Usage Information A single policy-map can be attached to one or more interfaces to specify the service-policy for those interfaces. A policy map attached to an interface can be modified. Related Commands policy-map-output - creates an output policy map. service-queue Assign a class map and QoS policy to different queues. C9000 Series Syntax service-queue queue-id [class-map class-map-name] [qos-policy qos-policy-name] 1712 Quality of Service (QoS)