Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1491

Parameters To return to the default time interval, use the no ipv6 ospf dead-interval command. seconds Enter the time interval in seconds. The range is from 1 to 65535 seconds. Defaults 40 seconds (Ethernet). Command Modes INTERFACE Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 9.1.(0.0) 7.8.1.0 7.4.1.0 8.3.19.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4810 and Z9000. Added support for C-Series. Introduced on the E-Series. Introduced on the S4820T. Usage Information By default, the dead interval is four times longer than the default hello-interval. Related Commands ipv6 ospf hello-interval - specifies the time interval between hello packets. ipv6 ospf encryption Configure an IPsec encryption policy for OSPFv3 packets on an IPv6 interface. C9000 Series Syntax Parameters ipv6 ospf encryption {null | ipsec spi number esp encryptionalgorithm [key-encryption-type] key athentication-algorithm [key-encryption-type] key}} null ipsec spi number esp encryptionalgorithm Causes an encryption policy configured for the area to not be inherited on the interface. Security Policy index (SPI) value that identifies an IPsec security policy. The range is from 256 to 4294967295. Encryption algorithm used with ESP. Open Shortest Path First (OSPFv2 and OSPFv3) 1491