Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 2105

match source-protocol Specify matching criteria while exporting or importing routes. C9000 Series Syntax Parameters match source-protocol {bgp | isis | ospf | connected | static} bgp isis ospf connected static Enter the keyword bgp to leak or share routes corresponding to the BGP protocol. Enter the keyword isis to leak or share routes corresponding to the ISIS protocol. Enter the keyword ospf to leak or share routes corresponding to the OSPF protocol. Enter the keyword connected to leak or share connected routes corresponding to the VRF. Enter the keyword static to leak or share static routes corresponding to the VRF. Command Modes ROUTE MAP MODE Command History Version Description 9.9(0.0) Introduced on the C9010. 9.8(0.0) Introduced on the S3048-ON and S4048-ON. 9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000- ON, and Z9500. Usage Information You can specify the matching criteria only after defining a route-map. Before using this command, you must enter the route map mode using the route-map routemap-name command. The match criteria that you specify is associated with the route-map that you define. The export-target and import-target support only the match protocol and match prefix-list options. Other options that are configured in the route-maps are ignored. Related Commands ipv6 route-import - imports IPv6 routes from another VRF. Virtual Routing and Forwarding (VRF) 2105