Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1702

Usage Information An aggregate output QoS policy applies to all outbound port traffic. An aggregate output QoS policy can coexist with per-queue output QoS policies. Related Commands policy-map-input - creates an input policy map. policy-map-output - creates an output policy map. policy-map-input Create an input policy map. C9000 Series Syntax policy-map-input policy-map-name [layer2] [cpu-qos] To remove an input policy map, use the no policy-map-input policy-mapname [layer2] [cpu-qos] command. Parameters policy-map-name Enter the name of the policy map in character format (32 characters maximum). layer2 (OPTIONAL) Enter the keyword layer2 to specify a Layer 2 Class Map. The default is Layer 3. cpu-qos (OPTIONAL) Enter the keyword cpu-qos to create an input policy to be used to rate-limit control-plane traffic (CoPP). Defaults Layer 3 Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 8.2.1.0 7.6.1.0 7.5.1.0 7.4.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Policy name character limit increased from 16 to 32. Introduced on the S-Series. Introduced on the C-Series. Expanded to add support for Layer 2. 1702 Quality of Service (QoS)