Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 115

rp linecard slot-id all Enter the keyword rp to display the interface statistics only from the Route Processor. Enter the linecard slot-id parameters to display the interface statistics only from a specified line card. The range of line-card slot IDs is from 0 to 11. Enter the keyword all to display the interface statistics from all switch CPUs, including the Control Processor, Route Processor, and line cards. Defaults Display interface statistics from all switch CPUs. Command Modes EXEC Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.12.0 8.3.11.1 7.6.1.0 7.5.1.0 6.2.1.1 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the S4810. Introduced on the Z9000. Introduced on the S-Series. Introduced on the C-Series Introduced on the E-Series. Usage Information Traffic statistics are sorted on a per-interface basis; the interface receiving the most traffic is displayed first. All CPU and port information is displayed unless a specific port or CPU is specified. Traffic information is displayed for router ports only; not for management interfaces. Example Dell#show cpu-traffic-stats cp -- Partybus ethernet statistics -- Link state : Up Recv Interrupts/Polls: 0 Recv Packets : 2027080 Transmit Packets : 590000 Recv Desc Error : 0 Transmit Desc Error : 0 Recv Out of Mem : 0 Transmit Out of Mem : 0 Recv Upper Layer Full: 0 Transmit Pause Pkts : 0 Recv Other Error : 0 Transmit Other Error: 0 Recv Restarts : 0 Recv Restarts Fatal : 0 Control and Monitoring 115