Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 332

Command Modes PREFIX-LIST Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.11.1 8.1.1.0 7.6.1.0 7.5.1.0 6.1.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the Z9000. Introduced on the E-Series ExaScale. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Usage Information Sequence numbers for this filter are automatically assigned starting at sequence number 5. If you do not use the ge or le options, only packets with an exact match to the prefix are filtered. Related Commands deny - configures a filter to drop packets. seq - configures a drop or permit filter with a specified sequence number. seq To a deny or permit filter in a prefix list while configuring the filter, assign a sequence number. C9000 Series Syntax seq sequence-number {deny | permit} {any} | [ip-prefix /nn {ge min-prefix-length} {le max-prefix-length}] | [bitmask number] To delete a specific filter, use the no seq sequence-number {deny | permit} {any} | [ip-prefix {ge min-prefix-length} {le maxprefix-length}] | [bitmask number]. Parameters sequencenumber deny Enter a number. The range is from 1 to 65534. Enter the keyword deny to configure a filter to drop packets meeting this condition.. 332 Access Control Lists (ACL)