Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 881

Example (peGigESingle Range) This example shows single range configuration for PE Gigabit Ethernet ports. Dell(conf)#interface range pegigE 1/0/3-14 Dell(conf-if-range-pegi-1/0/3-14)# Example (Multiple Range) This example shows how to use commas to add different interface types to the range enabling all 10-Gigabit Ethernet interfaces in the range 2/1 to 2/23 and both 10-Gigabit Ethernet interfaces 1/1 and 1/2. Dell(config-if)# interface range tengigabitethernet 2/1-23, tengigabitethernet 1/1-2 Dell(config-if-range)# no shutdown Dell(config-if-range)# Example (Multiple This example shows how to use commas to add VLAN and port-channel interfaces Range) to the range. Dell(config-if)# interface range tengigabitethernet 2/1-23, tengigabitethernet 1/1-2, Vlan 2-100, Port 1-25 Dell(config-if-range)# no shutdown Dell(config-if-range)# Related Commands • interface port-channel - configures a port channel group. • interface vlan - configures a VLAN interface. • show config (from INTERFACE RANGE mode) - shows the bulk configuration interfaces. • show range - shows the bulk configuration ranges. • interface range macro (define) - defines a macro for an interface-range. interface range macro (define) Defines a macro for an interface range and then saves the macro in the running configuration. C9000 Series Syntax Parameters define interface range macro name interface , interface , ... name interface, interface,... Enter up to 16 characters for the macro name. Enter the keywords interface range and one of the interfaces - slot/port, pe-id/stack-unit/port-id, portchannel, or VLAN number. Select the range of interfaces for bulk configuration. You can enter up to six commaseparated ranges. Spaces are not required between the commas. Comma-separated ranges can include VLANs, port-channels, and physical interfaces. Slot/Port information must contain a space before and after the dash. For example, interface range Interfaces 881