Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1878

-c encryption cipher Enable the "FIPS mode enable", this mode will support only v2 client. "no fips mode enable"(disable) will support v1 & v2 client. This comment is applicable for both ciphers & HMAC algorithms: • 3des-cbc • aes128-cbc • aes192-cbc • aes256-cbc • aes128-ctr • aes192-ctr • aes256-ctr -l username -m HMAC algorithm (OPTIONAL) Enter the keyword -l then the user name used in this SSH session. The default is the user name of the user associated with the terminal. Enter one of the following HMAC algorithms to use. (For v2 clients only): "no fips mode enable"(disable) will support v1 & v2 client. • hmac-sha1 • hmac-sha1-96 • hmac-md5 • hmac-md5-96 • hmac-sha2-256 • hmac-sha2-256-96 -p port-number -v {1 | 2} (OPTIONAL) Enter the keyword -p then the port number. The range is from 1 to 65535. The default is 22. (OPTIONAL) Enter the keyword -v then the SSH version 1 or 2. The default is the version from the protocol negotiation. Defaults As shown in the Parameters section. Command Modes EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.5(0.1) Description Introduced on the C9010. Added support for the following ciphers and HMAC alogorithms on the Z9000, S6000, S4820T, S4820T. 1878 Security