Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 205

Example Related Commands Version 8.3.19.0 8.3.11.4 8.3.11.1 8.3.7.0 7.5.1.0 E-Series Description Introduced on the S4820T. Output expanded to display current reload mode (normal or Jumpstart). Introduced on the Z9000. Introduced on the S4810. Introduced on the C-Series. Original command. Dell#show bootvar PRIMARY IMAGE FILE = ftp://ftp:[email protected]/tftpboot/ FTOS-VG-1-0-0-4079.bin SECONDARY IMAGE FILE = ftp://ftp:[email protected]/tftpboot/ FTOS-VG-1-0-0-4046.bin DEFAULT IMAGE FILE = system://A LOCAL CONFIG FILE = variable does not exist PRIMARY HOST CONFIG FILE = variable does not exist SECONDARY HOST CONFIG FILE = variable does not exist PRIMARY NETWORK CONFIG FILE = variable does not exist SECONDARY NETWORK CONFIG FILE = variable does not exist CURRENT IMAGE FILE = ftp://ftp:[email protected]/tftpboot/ FTOS-VG-1-0-0-4079.bin CURRENT CONFIG FILE 1 = flash://startup-config CURRENT CONFIG FILE 2 = variable does not exist CONFIG LOAD PREFERENCE = local first BOOT INTERFACE GATEWAY IP ADDRESS = 10.11.93.254 Reload Mode = normal-reload boot system - sets the location of Dell Networking OS image files. show file Display contents of a text file in the local filesystem. C9000 Series Syntax show file filesystem From a PE console, use show file filesystem to view the contents of a text file. Parameters filesystem Enter one of the following: • For internal flash, enter flash: • For USB flash, enter usbflash: File Management 205