Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 394

Version 7.8.1.0 7.7.1.0 6.3.1.0 Description Introduced on the S-Series. Introduced on the C-Series. Introduced Usage Information The MED is a 4-byte unsigned integer value and the default behavior is to assume a missing MED as 4294967295. This command causes a missing MED to be treated as 0. During path selection, paths with a lower MED are preferred over paths with a higher MED. bgp bestpath router-id ignore Do not compare router-id information for external paths during best path selection. C9000 Series Syntax bgp bestpath router-id ignore To return to the default selection, use the no bgp bestpath router-id ignore command. Defaults Disabled Command Modes ROUTER BGP Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 8.3.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced Usage Information Configuring this option retains the current best-path. When sessions are then reset, the oldest received path is chosen as the best-path. 394 Border Gateway Protocol