Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1182

cam_count List the count of the CAM rules for this ACL. interface interface Enter the keyword interface and the interface type and slot/port or number information: • For a Port Channel interface, enter the keywords portchannel a port channel number.The range is from 1 to 128. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet and the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE and the slot/port information. Command Modes • EXEC • EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.0.2.0 8.5.1.0 8.4.2.1 8.2.1.0 7.8.1.0 7.4.1.0 Description Introduced on the C9010. Introduced on the S6000. Added support for 4-port 40G line cards on ExaScale. Introduced on the S-Series. Introduced on the E-Series ExaScale. Introduced on the C-Series. Increased the name string to accept up to 140 characters. Prior to version 7.8.1.0, names are up to 16 characters long. Introduced on the E-Series TeraScale. Usage Information Field "Ingress IPv6..." "seq 10..." Description Displays the name of the IPv6 ACL, in this Example "AclList1". Displays the filter. If the keywords count or byte were configured in the filter, the number of packets or bytes processed by the filter is displayed at the end of the line. Example Dell#show ipv6 accounting access-list ! Ingress IPv6 access list V6-ACL on TenGigabitEthernet 10/1 Total cam count 2 1182 IPv6 Access Control Lists (IPv6 ACLs)