Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1631

count value Enter the keyword count with a count value to specify the packet count. Count value range is from 1 to 4294967295. Default count vlaue is infinity. Default None Command Modes EXEC Privilege Command History Version 9.9(0.0) Description Introduced on the C9010. Example Dell#debug pe-csp interface port-channel 258 packets tx detail count 2 show software pemgr Display the port extender (PE) manager data. C9000 Series Syntax show software pemgr pe-id {ipc-stats [message type 0-FFFFF | service-id 0-FFFF ]| pq-stats {High | Medium | Low}| regclient} From a PE console, use show software pemgr{ipc-stats [message type 0-FFFFF | service-id 0-FFFF ]| pq-stats {High | Medium | Low}| reg-client} to view the PE manager software information. Parameters pe pe-id ipc-stats message type service-d pq-stats High Medium Low Enter the keyword pe and the port extender ID. Range is from 0 to 255. Enter the keyword ipc-stats to display inter-module communication statistics. (Optional) Enter the keyword option message type to display the data in 0-FFFF message data format. (Optional) Enter the keyword option service-id to display the statistics with a specified service or module ID. Enter the keyword pq-stats to display a summary of priority queue (PQ) based statistics. (Optional) Enter the keyword High to display the statistics for the high priority queue. (Optional) Enter the keyword Medium to display the statistics for the medium priority queue. (Optional) Enter the keyword Low to display the statistics for the low priority queue. Port Extenders (PE) 1631