Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 365

Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 8.1.1.0 7.8.1.0 7.6.1.0 7.5.1.0 6.1.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the E-Series ExaScale. Increased the name string to accept up to 140 characters. Prior to 7.8.1.0, names are up to 16 characters long. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Example Related Commands Dell#show route-map route-map firpo, permit, sequence 10 Match clauses: Set clauses: tag 34 Dell# route-map - configures a route map. AS-Path Commands The following commands configure AS-Path ACLs. ip as-path access-list Enter AS-PATH ACL mode and configure an access control list based on the BGP AS_PATH attribute. C9000 Series Syntax Parameters ip as-path access-list as-path-name as-path-name Enter the access-list name, up to 140 characters. Defaults Not configured. Access Control Lists (ACL) 365