Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 472

Related Commands [. . .] Outgoing packet capture enabled for BGP neighbor 20.20.20.2 Available buffer size 40958758, 27 packet(s) captured using 562 bytes PDU[1] : len 41, captured 00:34:52 ago ffffffff ffffffff ffffffff ffffffff 00290104 000100b4 14141401 0c020a01 04000100 01020080 00000000 PDU[2] : len 19, captured 00:34:51 ago ffffffff ffffffff ffffffff ffffffff 00130400 PDU[3] : len 19, captured 00:34:50 ago ffffffff ffffffff ffffffff ffffffff 00130400 [. . .] Dell# capture bgp-pdu max-buffer-size - specifies a size for the capture buffer. show config View the current ROUTER BGP configuration. C9000 Series Syntax show config Command Modes ROUTER BGP Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.8.1.0 7.7.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Example Dell(conf-router_bgp)#show config ! router bgp 45 neighbor suzanne peer-group neighbor suzanne no shutdown neighbor sara peer-group neighbor sara shutdown neighbor 13.14.15.20 peer-group suzanne neighbor 13.14.15.20 shutdown 472 Border Gateway Protocol