Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 134

NOTE: The pe option is only visible when the extended bridge feature is enabled. Defaults Display IPC message statistics on all switch CPUs: Control Processor, Route Processor, and line cards. Command Modes • EXEC • EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.12.0 8.3.11.1 8.1.1.0 7.6.1.0 7.5.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the S4810. Introduced on the Z9000. Introduced on the E-Series ExaScale. Introduced on the S-Series. Introduced on the C-Series and E-Series. Usage Information Important Points: • Use show processes ipc commands only when you are working directly with Dell Technical Support to troubleshoot a problem. Example: show processes ipc send-stats Dell#show processes ipc send-stats rp IPC Send Statistics on RP Memory Used by Send DB on this processor: 1451880 bytes SeqNo - Last sent guaranteed IPC pkt sequence no from this source to destination Success - No of successfull guaranteed IPC packets sent from source to destination 1st-R - No of first retry attempts 2nd-R - No of second retry attempts Fails - No of guaranteed IPC pkts that could not be transmitted RTT(ms) - Avg. Round Trip time for guaranteed IPC packets in millisecs NonG-S - No of non-guaranteed IPC pkts succesfully sent. This does not include those sent by SWP NonG-F - No of non-guaranteed IPC pkt transmission failures SWP-S - No of non-guaranteed SWP IPC pkts succesfully sent SWP-F - No of non-guaranteed SWP IPC pkt transmission failures 134 Control and Monitoring