Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 400

• ROUTER BGP-address-family Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.8.1.0 7.7.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Usage Information If you enter the bgp dampening command, the default values for half-life, reuse, suppress, and max-suppress-time are applied. The parameters are position-dependent; therefore, if you configure one parameter, configure the parameters in the order they appear in the CLI. Related Commands show ip bgp dampened-paths - views the BGP paths. bgp default local-preference Change the default local preference value for routes exchanged between internal BGP peers. C9000 Series Syntax bgp default local-preference value To return to the default value, use the no bgp default local-preference command. Parameters value Defaults 100 Command Modes ROUTER BGP Enter a number to assign to routes as the degree of preference for those routes. When routes are compared, the higher the degree of preference or local preference value, the more the route is preferred. The range is from 0 to 4294967295. The default is 100. 400 Border Gateway Protocol