Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1922

notify name access accesslist-name ipv6 access-listname access-list-name ipv6 access-listname (OPTIONAL) Enter the keyword notify then a name (a string of up to 20 characters long) as the notify view name. (Optional) Enter the standard IPv4 access list name (a string up to 16 characters long). (Optional) Enter the keyword ipv6 then the IPv6 access list name (a string up to 16 characters long). (Optional) Enter both an IPv4 and IPv6 access list name. Defaults As above. Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.10.2 8.3.7.0 7.6.1.0 7.5.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Added support for the access parameter. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Usage Information The following Example specifies the group named harig as a version 3 user requiring both authentication and encryption and read access limited to the read named rview. NOTE: The number of configurable groups is limited to 16 groups. Example Related Commands Dell#conf Dell(conf)# snmp-server group harig 3 priv read rview Dell# show snmp group - displays the group name, security model, view status, and storage type of each group. show running-config - displays the SNMP running configuration. 1922 Simple Network Management Protocol (SNMP) and Syslog