Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 961

Example Version 6.2.1.0 Description Introduced on the E-Series. Dell(conf-if-po-1)# show config ! interface Port-channel 1 no ip address shutdown Dell(conf-if-po-1)# show interfaces port-channel Display information on configured Port Channel groups. C9000 Series Syntax Parameters show interfaces port-channel [channel-number] [brief] channel-number brief For a Port Channel interface, enter the keyword portchannel then a number. The range is from 1 to 513. Range 1 to 128 is for manual LAG configuration and port channel range 257 to 513 is reserved for Auto-LAG configuration. (OPTIONAL) Enter the keyword brief to display only the port channel number, the state of the port channel, and the number of interfaces in the port channel. Command Modes • EXEC • EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 8.1.1.0 7.6.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the E-Series ExaScale. Introduced on the S-Series. Modified to display the LAG failover group status. Interfaces 961